The SIP HG2300MP Inverter Welder can take care of most tasks, as it boasts MIG, TIG, and ARC functions. Infinitely variable weld output settings and high duty cycles offer unrivalled versatility. 230v (16A) input supply. SIP Trade Weldmate T105P mig gas welder comes with everything included: welding mask, wire, disposable gas cylinder, regulator, chipping hammer/wire brush and earth cable with clamp. It has a heavy duty case and is fully portable.It has 105 amp power which will weld up from 0.7mm to 4.5mm mild steel, aluminium and stainless steel with the appropriate gas and wire. Weldmate T105P features. Product Overview A welder that offers portability, ease of use and convenience, with 2 output power settings and a 60-125amp (peak) current range this Mig welder has a 1.2 - 4mm approx weld thickness (mild steel). Features thermal overload indication. Manufactured with a.
- Setting Up A Mig Welder
- Mig Welder Setup
- Sip 150 Mig Welder Settings Harbor Freight
- Gas Setting For Mig Welder
- Sip 150 Mig Welder Settings Welder
If you’re confused about which MIG welding polarity settings you should be using for flux core wire, and for solid wire…
…then this article will quickly clear things up for you.
Here’s why it’s so important to set polarity for mig welding correctly…
If you’re using your MIG welder with flux core wire, and you have it set on the wrong polarity, you’ll quickly notice that your welds will look nasty, like this…
Setting Up A Mig Welder
You’ll notice lots of spatter. This image was from using flux core wire on the wrong polarity setting.
Mig Welder Setup
If you want to avoid this headache, then make sure you switch your MIG welding polarity settings any time you change from solid wire to flux core wire.
If you’re not sure what the difference is between using solid MIG welding wire, and gasless (or flux core wire), it’s pretty simple.
We use solid wire when we’re using a shielding gas, and that’s typically C25 gas (25% carbon dioxide and 75% argon) when welding mild steel.
For other processes like aluminum you would use 100% argon shielding gas.
The reason we use gas is because it shields the weld puddle from the contaminents in the atmosphere that can wreak havoc on the weld appearance and strength.
With flux core wire, there’s no need for using a shielding gas because the shielding agent is inside the wire, and when the arc starts it acts as the shielding agent.
Sip 150 Mig Welder Settings Harbor Freight
You have what it takes to weld! Get started today!!
Gas Setting For Mig Welder
- Step by step process
- No guessing wire speed or voltage
- Overview of welding & brazing
We respect your privacy & promise not to spam you.
Direct Current Electrode Negative
So, for gasless MIG welding polarity (when using flux core wire), your MIG welding polarity settings should be set to direct current electrode negative (or DCEN).
With DCEN, the negative terminal inside your machine is hooked up to your electrode (your MIG gun) while the positive terminal is hooked up to your ground.
Electrons flow from negative to positive, so with DCEN the electrons are traveling from the machine to the MIG gun. They then travel through the workpiece and ground cable, then back to the machine.
It’s opposite for DCEP.
Sip 150 Mig Welder Settings Welder
Direct Current Electrode Positive
For DCEP, you now have your positive terminal hooked up to your electrode. The electrons now travel in the reverse direction (from the machine through the ground cable, and back in through the MIG gun.)
I hope this helps you with your MIG welding polarity change.